Re: 5.7 wiring diagram / pin list
[Re: mcat4321]
#1750236
02/10/15 06:30 PM
02/10/15 06:30 PM
|
Joined: Sep 2008
Posts: 656 Florida
CJD AUTOMOTIVE
mopar
|
mopar
Joined: Sep 2008
Posts: 656
Florida
|
Yes you can do it, is it worth it is another question. The last one I did was a 2010 engine/trans in a old Dakota. I paired down the harness, used the 2010 TIPM, WCM and ABS controller for VSS. Had to have a tone ring made for inside the front rotor and used a single 2010 speed sensor. I used the 2010 cluster as well. This was a friends truck, so he didn't pay shop rate, but if he had, you would be far ahead to just use a Holley plug and play system and swap out the trans for a manual, or dare I say it, 4L80E. The Holley will control a GM trans and the adapter is cheaper than making the Chrysler work. [URL=http://s1060.photobucket.com/user/340cuda/media/IMG_0023_2_zps6540b491.jpg.html [/URL] [URL=http://s1060.photobucket.com/user/340cuda/media/file_zps68ae8b7b.jpg.html] [/URL] [URL=http://s1060.photobucket.com/user/340cuda/media/file_zpsc55b8839.jpg.html] [/URL] This is just a small pile of the harness that was paired down. [URL=http://s1060.photobucket.com/user/340cuda/media/file_zpsdefa2e4e.jpg.html] [/URL]
Craig Scholl CJD Automotive, LLC Jacksonville, FL www.CJDAUTOMOTIVE.com904-400-1802 "I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
|
|
|
Re: 5.7 wiring diagram / pin list
[Re: dogdays]
#1750239
02/11/15 12:49 PM
02/11/15 12:49 PM
|
Joined: Sep 2008
Posts: 656 Florida
CJD AUTOMOTIVE
mopar
|
mopar
Joined: Sep 2008
Posts: 656
Florida
|
Quote:
Hey, that front seat looks like mine did a few years ago! Now it looks worse.
R.
You should see the outside! It does run 11.50's and gets 26 MPG on the highway though...
Last edited by CJD AUTOMOTIVE; 02/11/15 12:51 PM.
Craig Scholl CJD Automotive, LLC Jacksonville, FL www.CJDAUTOMOTIVE.com904-400-1802 "I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
|
|
|
Re: 5.7 wiring diagram / pin list
[Re: 440mag]
#1750240
02/11/15 12:53 PM
02/11/15 12:53 PM
|
Joined: Sep 2008
Posts: 656 Florida
CJD AUTOMOTIVE
mopar
|
mopar
Joined: Sep 2008
Posts: 656
Florida
|
Quote:
Craig,
Thanks for the reply. Good information. I would like to give it a try depending on how much of the dash I need to keep. Any info you are willing to share is much appreciated.
Making a tone ring is not a problem.
When I get a little time, I'll copy some wiring diagrams for you. Need the last 8 of the VIN.
Craig Scholl CJD Automotive, LLC Jacksonville, FL www.CJDAUTOMOTIVE.com904-400-1802 "I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"
|
|
|
|
|