Radial Duster Build - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Radial Duster Build

Print Thread

Page 3 of 9

1

2

3

4

5

6

7

8

9

Re: Radial Duster Build [Re: tubtar] #1703490 12/07/14 11:34 PM 12/07/14 11:34 PM
Joined: May 2008 Posts: 1,238 North Cackilacky S sdaurity pro stock
sdaurity pro stock S Joined: May 2008 Posts: 1,238 North Cackilacky	Quote: Slouch down and get that tube above the elbow maybe ? Its not that. The side bars cross in the door opening is so low and toward the front in a barrel roll your legs could come over the bars and out the side. If it was higher and more centered in the opening it couldn't happen. That's why the x in the roof, all the window net stuff has to be in the bars etc. They want you and all your limbs to stay inside the cage. One day I will have something cool here.

Re: Radial Duster Build [Re: sdaurity] #1703491 12/08/14 05:50 PM 12/08/14 05:50 PM
Joined: Nov 2011 Posts: 155 Post falls, Idaho R rgreule OP member
rgreule OP member R Joined: Nov 2011 Posts: 155 Post falls, Idaho	im not worried about the cage not passing at all.. has already been looked over.. 70 Duster radial turbo build https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1703523/1.html

Re: Radial Duster Build [Re: rgreule] #1703492 12/08/14 05:51 PM 12/08/14 05:51 PM
Joined: Nov 2011 Posts: 155 Post falls, Idaho R rgreule OP member
rgreule OP member R Joined: Nov 2011 Posts: 155 Post falls, Idaho	unlimted glass hood, trunk lid, and bumpers came in this morning.. decent quality, will need a little work but nothing to bad. 70 Duster radial turbo build https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1703523/1.html

Re: Radial Duster Build [Re: rgreule] #1703493 12/10/14 01:18 AM 12/10/14 01:18 AM
Joined: Jun 2010 Posts: 469 Tennessee S steeldust mopar
steeldust mopar S Joined: Jun 2010 Posts: 469 Tennessee	Looking great .M/T Pro Radials works killer . Good luck. 8357101-10653671_10201571558129941_885380876871372220_n[1].jpg (475 downloads) Last edited by steeldust; 12/10/14 01:22 AM.

Re: Radial Duster Build [Re: steeldust] #1703494 12/10/14 01:16 PM 12/10/14 01:16 PM
Joined: Feb 2004 Posts: 34,927 S.E. South Dakota ! bigdad Still Posting A Lot
bigdad Still Posting A Lot Joined: Feb 2004 Posts: 34,927 S.E. South Dakota !	Looking forward to more updates , looks awesome so far The lips of fools bring them strife, and their mouths invite a beating.Proverbs 18:6

Re: Radial Duster Build [Re: bigdad] #1703495 12/18/14 01:21 AM 12/18/14 01:21 AM
Joined: Nov 2011 Posts: 155 Post falls, Idaho R rgreule OP member
rgreule OP member R Joined: Nov 2011 Posts: 155 Post falls, Idaho	small update.. more of the steering.. not finished yet but almost, will have a t bolt clamp in 2 spots. also decided on new headers.. not finished but alot cleaner looking in my opinion.. 70 Duster radial turbo build https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1703523/1.html

Re: Radial Duster Build [Re: rgreule] #1703496 12/18/14 01:32 AM 12/18/14 01:32 AM
Joined: Feb 2011 Posts: 4,302 Nebraska 72Swinger master
72Swinger master Joined: Feb 2011 Posts: 4,302 Nebraska	That is gonna work real good! Mopar to the bone!!!

Re: Radial Duster Build [Re: 72Swinger] #1703497 12/18/14 02:12 AM 12/18/14 02:12 AM
Joined: Jun 2005 Posts: 435 New Mexico S Scott440 mopar
Scott440 mopar S Joined: Jun 2005 Posts: 435 New Mexico	When I saw only the title of this thread, I imagined a P&W Wasp in a Duster. I thought, either that's a heck of an engine swap or it's some sort of crop duster.

Re: Radial Duster Build [Re: Scott440] #1703498 12/18/14 02:45 AM 12/18/14 02:45 AM
Joined: Jul 2008 Posts: 361 Canada onig enthusiast
onig enthusiast Joined: Jul 2008 Posts: 361 Canada	Great build, love it. A couple of questions; A - What do you think the car will weigh B - Why two master cylinders? I see some race cars with two or three masters. Keep the updates coming. 69 Dart

Re: Radial Duster Build [Re: onig] #1703499 12/18/14 03:10 AM 12/18/14 03:10 AM
Joined: Nov 2011 Posts: 155 Post falls, Idaho R rgreule OP member
rgreule OP member R Joined: Nov 2011 Posts: 155 Post falls, Idaho	im not sure what it will weigh.. id guess 3200 or so maybe more.. and it has a master for the front and the rear.. because for one that is all i could find from wilwood and for two it will have dual calipers in the back to help with building boost before i get staged.. 70 Duster radial turbo build https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1703523/1.html

Re: Radial Duster Build [Re: rgreule] #1703500 12/22/14 03:34 PM 12/22/14 03:34 PM
Joined: Jan 2004 Posts: 4,570 Motor City 6 6PKRTSE master
6PKRTSE master 6 Joined: Jan 2004 Posts: 4,570 Motor City	NIce build. Alot of similar stuff I have done on my Challenger. I have to agree with SDaurity on the door bars passing in some areas but if your guy passes it that is good for you. 1963 Belvedere 440 Max Wedge Tribute 1970 Charger R/T S.E. 440 Six Pack 1970 Challenger R/T, 528 Hemi 1970 Charger 500 S.E. 440 4 BBL 1970 Plymouth Road Runner 383 1974 Chrysler New Yorker 440 1996 2500 RAM 488 V-10 4X4 2004 3500 Dually Cummins 4x4 2012 Challenger R/T Classic.

Re: Radial Duster Build [Re: 6PKRTSE] #1703501 12/23/14 01:55 PM 12/23/14 01:55 PM
Joined: Nov 2011 Posts: 155 Post falls, Idaho R rgreule OP member
rgreule OP member R Joined: Nov 2011 Posts: 155 Post falls, Idaho	^^ how is the challenger coming along? 70 Duster radial turbo build https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1703523/1.html

Re: Radial Duster Build [Re: rgreule] #1703502 12/23/14 09:02 PM 12/23/14 09:02 PM
Joined: Mar 2010 Posts: 625 Indianapolis In. usa Quickrunner mopar
Quickrunner mopar Joined: Mar 2010 Posts: 625 Indianapolis In. usa	Got any pics of how you put the front leaf spring pockets into the frame? Want to see if how I am planning is close to what you ended up with. You running a 20 inch front segment? I have 25's and want to end up with 3 holes for adjustment in the pockets. Thinking about sinking my rear sliders up into the rails like you did but having the ability to adjust them height wise some. 05 Ram 1500 Daytona package 71 Demon Gen3 hemi drag radial project Missin' my 9 second 70 runner!

Re: Radial Duster Build [Re: Quickrunner] #1703503 12/31/14 01:07 AM 12/31/14 01:07 AM
Joined: Nov 2011 Posts: 155 Post falls, Idaho R rgreule OP member
rgreule OP member R Joined: Nov 2011 Posts: 155 Post falls, Idaho	new hot side is all finished.. turned out great imo.. set the grill in it to get a glimps of how it will look.. pretty excited a few more of the engine bay almost finished.. next is change the fire wall to get rid of the old steering, and brake holes.. steering stuff looks good in there.. thats all for now.. gonna get a bell 3.25 radiator care and do a custom radiator that will fit better and work better, got to raise the tunnel a little under the back seat and probably do something with the front so the tires dont hit the inners if it ever comes down hard or something.. thanks for looking 70 Duster radial turbo build https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1703523/1.html

Re: Radial Duster Build [Re: Quickrunner] #1703504 12/31/14 01:08 AM 12/31/14 01:08 AM
Joined: Nov 2011 Posts: 155 Post falls, Idaho R rgreule OP member
rgreule OP member R Joined: Nov 2011 Posts: 155 Post falls, Idaho	Quote: Got any pics of how you put the front leaf spring pockets into the frame? Want to see if how I am planning is close to what you ended up with. You running a 20 inch front segment? I have 25's and want to end up with 3 holes for adjustment in the pockets. Thinking about sinking my rear sliders up into the rails like you did but having the ability to adjust them height wise some. i dont happen to have any pics of that at the moment sorry... next time its on the lift i can.. its just the standard relocation boxes put as far up as they could go 70 Duster radial turbo build https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1703523/1.html

Re: Radial Duster Build [Re: rgreule] #1703505 12/31/14 09:25 AM 12/31/14 09:25 AM
Joined: Aug 2008 Posts: 4,072 Mo. racerx master
racerx master Joined: Aug 2008 Posts: 4,072 Mo.	Looking like it's going to be a bada$$ ride

Re: Radial Duster Build [Re: racerx] #1703506 01/01/15 03:07 PM 01/01/15 03:07 PM
Joined: Feb 2011 Posts: 105 michigan J jbmopars member
jbmopars member J Joined: Feb 2011 Posts: 105 michigan	Looks awesome Ryan. This build is a far cry from what I was expecting when you first started. Going to be a Badass.

Re: Radial Duster Build [Re: jbmopars] #1703507 01/01/15 04:15 PM 01/01/15 04:15 PM
Joined: May 2003 Posts: 13,200 aZLiViN J J_BODY I Live Here
J_BODY I Live Here J Joined: May 2003 Posts: 13,200 aZLiViN	obviously some research has been done prior to this build..... but I'm curious about the stock small block head bolt configuration and boost?

Re: Radial Duster Build [Re: jbmopars] #1703508 01/02/15 01:32 PM 01/02/15 01:32 PM
Joined: Nov 2011 Posts: 155 Post falls, Idaho R rgreule OP member
rgreule OP member R Joined: Nov 2011 Posts: 155 Post falls, Idaho	Quote: Looks awesome Ryan. This build is a far cry from what I was expecting when you first started. Going to be a Badass. thanks jody.. means alot, if it turns out the way its imaged in my head then i should have a decnt car lol 70 Duster radial turbo build https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1703523/1.html

Re: Radial Duster Build [Re: J_BODY] #1703509 01/02/15 01:36 PM 01/02/15 01:36 PM
Joined: Nov 2011 Posts: 155 Post falls, Idaho R rgreule OP member
rgreule OP member R Joined: Nov 2011 Posts: 155 Post falls, Idaho	Quote: obviously some research has been done prior to this build..... but I'm curious about the stock small block head bolt configuration and boost? 10 head bolts just like a SBF.. and there is alot of turboed SBF, i dont think ill have any issues, especially with good studs and good MLS gaskets. 70 Duster radial turbo build https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1703523/1.html

Page 3 of 9

1

2

3

4

5

6

7

8

9

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1