|
Hemi Hone plate??
#169502
12/17/08 08:39 PM
12/17/08 08:39 PM
|
Joined: Nov 2003
Posts: 6,293 Rock Springs
Bob_Coomer
OP
master
|
OP
master
Joined: Nov 2003
Posts: 6,293
Rock Springs
|
Where is the best place to buy a large Bore (4.5 inch+) Hemi torque plate, without breaking the bank? Me and another guy wants to go in halves on one, Our local machinist doesn't have one of these. I'm sure he can get one, but If we buy one we might get some free machine work on trade, he does real good work, and just bought a new crank grinder, and I don't think he would use it often around here anyways. Thanks Bob
[color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]
|
|
|
Re: Hemi Hone plate??
[Re: CRE2004]
#169504
12/17/08 09:06 PM
12/17/08 09:06 PM
|
Joined: Nov 2003
Posts: 6,293 Rock Springs
Bob_Coomer
OP
master
|
OP
master
Joined: Nov 2003
Posts: 6,293
Rock Springs
|
Well I figured we could pickup one even (used) if possible. I was trying to keep the price down under $200 each, or $400 total. Is this in line with whats out there?
[color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]
|
|
|
Re: Hemi Hone plate??
[Re: Bob_Coomer]
#169506
12/17/08 09:27 PM
12/17/08 09:27 PM
|
Joined: Nov 2003
Posts: 2,503 Illinois
CRE2004
super gas
|
super gas
Joined: Nov 2003
Posts: 2,503
Illinois
|
Quote:
Well I figured we could pickup one even (used) if possible. I was trying to keep the price down under $200 each, or $400 total. Is this in line with whats out there?
The cheapo Goodson wedge plates are about 450 bux each and would require mods and the BHJ hemi plate retails at 550 each
|
|
|
|
|
|