Ultra Hp Dominators - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Ultra Hp Dominators

Print Thread

Ultra Hp Dominators #1552750 12/24/13 10:16 PM 12/24/13 10:16 PM
Joined: Mar 2005 Posts: 2,644 North Carolina sasquatch OP master
sasquatch OP master Joined: Mar 2005 Posts: 2,644 North Carolina	I don't post much here anymore but felt a good report on a part was worth it. I just got home from dynoing a customers 540 Indy ez head motor. I used a 1050 Ultra Hp dominator from Holley. Out of the box. WOW! Idles at 900 Rpm, super responsive, Tons of adjustability, LIGHT( they are aluminum). Easily the best OOTB dominator I have ever had my hands on. Well done Holley. Not cheap, but very, very nice. Motor had great power and the torque curve looks like a pool table. FWIW www.mopartsracing.com

Re: Ultra Hp Dominators [Re: sasquatch] #1552751 12/24/13 11:30 PM 12/24/13 11:30 PM
Joined: Dec 2006 Posts: 3,395 Pa Hot 340 master
Hot 340 master Joined: Dec 2006 Posts: 3,395 Pa	how much (if any) tuning do you end up doing to it after it was all said and done?

Re: Ultra Hp Dominators [Re: sasquatch] #1552752 12/24/13 11:34 PM 12/24/13 11:34 PM
Joined: Jul 2004 Posts: 19,318 State of confusion T Thumperdart I Live Here
Thumperdart I Live Here T Joined: Jul 2004 Posts: 19,318 State of confusion	Quote: I don't post much here anymore but felt a good report on a part was worth it. I just got home from dynoing a customers 540 Indy ez head motor. I used a 1050 Ultra Hp dominator from Holley. Out of the box. WOW! Idles at 900 Rpm, super responsive, Tons of adjustability, LIGHT( they are aluminum). Easily the best OOTB dominator I have ever had my hands on. Well done Holley. Not cheap, but very, very nice. Motor had great power and the torque curve looks like a pool table. FWIW Those things look bad azz and apparently work well too............. 72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....

Re: Ultra Hp Dominators [Re: sasquatch] #1552753 12/24/13 11:35 PM 12/24/13 11:35 PM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate master
Hemi Allstate master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	Was this the New GEN III ? I have been wondering if they are worth the XTra $ ??? 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Re: Ultra Hp Dominators [Re: Hemi Allstate] #1552754 12/24/13 11:42 PM 12/24/13 11:42 PM
Joined: Dec 2007 Posts: 12,587 Great Neck,LI,new york hemi-itis I Live Here
hemi-itis I Live Here Joined: Dec 2007 Posts: 12,587 Great Neck,LI,new york	Holley had to do something to keep up with Pro Systems Looks like a real nice carb 7970420-7.15.12(15).jpg (92 downloads) HEMI-ITIS has no cure. My condition is fully BLOWN!!

Re: Ultra Hp Dominators [Re: hemi-itis] #1552755 12/25/13 08:17 AM 12/25/13 08:17 AM
Joined: Nov 2003 Posts: 1,664 North Sweden R RT540 top fuel
RT540 top fuel R Joined: Nov 2003 Posts: 1,664 North Sweden	Subscribed Ultra or new Gen 3, also interested. One of these are on my shopping list.

Re: Ultra Hp Dominators [Re: sasquatch] #1552756 12/25/13 10:18 AM 12/25/13 10:18 AM
Joined: Jan 2003 Posts: 2,924 A shed in England Tig master
Tig master Joined: Jan 2003 Posts: 2,924 A shed in England	Awesome!! Can't wait to hear how they are in a 2 x 4 application '74 Challenger..9.46 @ 145.9 1/4, 6.001 @ 118 1/8 so far. 4023lb !!! # N/A, Marsh performance 655ci, Indy Maxx, T/R, Indy 600-13 X's, Street legal, pump gas, full interior, Cal-Tracs, mufflers, 3:73's and real 10.5 radials. 9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with our old mule KB, 572-13, 580 wedge. RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03

Re: Ultra Hp Dominators [Re: Tig] #1552757 12/25/13 02:54 PM 12/25/13 02:54 PM
Joined: Nov 2004 Posts: 6,890 North Alabama M Monte_Smith master
Monte_Smith master M Joined: Nov 2004 Posts: 6,890 North Alabama	We(Holley) have a very dedicated carb team and a few things have been added to help that in the last few years. We have a new test stand that is state of the art, to check both wet and dry flow. We also built some new dyno engines that fall more along the lines of what guys have now, but most importantly, we bought a Top Dragster and actually take the stuff to the track and test it. Our latest stuff is as good anybodys and our finishes in the BLP carb shootouts prove that Monte

Re: Ultra Hp Dominators [Re: Monte_Smith] #1552758 12/25/13 03:34 PM 12/25/13 03:34 PM
Joined: Jan 2003 Posts: 31,046 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,046 Oregon	I tried to put together a magazine article on the new Dominators but nobody wanted to run it. I had the engine and dyno all lined up but unless someone is going to run the article there isn't any point in doing the work. I think the new carbs have a bunch of great features and I wanted to test out the 1350 cfm version to see if it would pick up any power over my current 1250. 7971083-514BLP.JPG (128 downloads)

Re: Ultra Hp Dominators [Re: AndyF] #1552759 12/25/13 03:53 PM 12/25/13 03:53 PM
Joined: Jun 2006 Posts: 5,163 CT GTX MATT master
GTX MATT master Joined: Jun 2006 Posts: 5,163 CT	Quote: I tried to put together a magazine article on the new Dominators but nobody wanted to run it. I had the engine and dyno all lined up but unless someone is going to run the article there isn't any point in doing the work. I think the new carbs have a bunch of great features and I wanted to test out the 1350 cfm version to see if it would pick up any power over my current 1250. I'm sure they'd want to run it if you were going to prove that some other brand carb out-performed a Holley. Now I need to pin those needles, got to feel that heat Hear my motor screamin while I'm tearin up the street

Re: Ultra Hp Dominators [Re: sasquatch] #1552760 12/25/13 04:27 PM 12/25/13 04:27 PM
Joined: Aug 2008 Posts: 4,071 Mo. racerx master
racerx master Joined: Aug 2008 Posts: 4,071 Mo.	Quote: I don't post much here anymore but felt a good report on a part was worth it. I just got home from dynoing a customers 540 Indy ez head motor. I used a 1050 Ultra Hp dominator from Holley. Out of the box. WOW! Idles at 900 Rpm, super responsive, Tons of adjustability, LIGHT( they are aluminum). Easily the best OOTB dominator I have ever had my hands on. Well done Holley. Not cheap, but very, very nice. Motor had great power and the torque curve looks like a pool table. FWIW Just curious why a 1050 on a 540 is this a street car? Last edited by racerx; 12/25/13 04:28 PM.

Re: Ultra Hp Dominators [Re: racerx] #1552761 12/25/13 04:55 PM 12/25/13 04:55 PM
Joined: Jun 2004 Posts: 6,780 Alabama Mopar-Al master
Mopar-Al master Joined: Jun 2004 Posts: 6,780 Alabama	I bought a new holley 1150 ultra and put it on my 512, Very nice carb, no issues with it's performance. At first wasnt sure if it was over kill

Re: Ultra Hp Dominators [Re: Mopar-Al] #1552762 12/25/13 05:00 PM 12/25/13 05:00 PM
Joined: Aug 2008 Posts: 4,071 Mo. racerx master
racerx master Joined: Aug 2008 Posts: 4,071 Mo.	I installed one of the 1150's on my 514,with no problems

Re: Ultra Hp Dominators [Re: racerx] #1552763 12/25/13 05:23 PM 12/25/13 05:23 PM
Joined: Nov 2004 Posts: 7,274 s.w.fl B bonefish master
bonefish master B Joined: Nov 2004 Posts: 7,274 s.w.fl	do they make a street strip version of it?

Re: Ultra Hp Dominators [Re: racerx] #1552764 12/25/13 05:24 PM 12/25/13 05:24 PM
Joined: Mar 2005 Posts: 2,644 North Carolina sasquatch OP master
sasquatch OP master Joined: Mar 2005 Posts: 2,644 North Carolina	80903 BK was the part number. Yes it is a "street" car. (still made 780). Due to the conditions yesterday, cold dry air, the numbers are a little higher than I expected but the purpose of the post was to comment on the carb. I liked it alot. Yes Tig X2 for the honey badger. Will order this week just postulating on the size. Any preference on the color and plating options? Todd www.mopartsracing.com

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1