Kevko oil pans anyone? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Kevko oil pans anyone?

Print Thread

Kevko oil pans anyone? #1551995 12/23/13 05:51 PM 12/23/13 05:51 PM
Joined: Aug 2003 Posts: 3,245 Between a rock & a hard place C cudadoug OP master
cudadoug OP master C Joined: Aug 2003 Posts: 3,245 Between a rock & a hard place	Anyone run this one? http://kevko.net/images/M301_302_large.jpg Do they fit?? Do they leak?? Thanks

Re: Kevko oil pans anyone? [Re: cudadoug] #1551996 12/23/13 06:02 PM 12/23/13 06:02 PM
Joined: Aug 2003 Posts: 11,179 Atco NJ DJVCuda I Live Here
DJVCuda I Live Here Joined: Aug 2003 Posts: 11,179 Atco NJ	My Kevko was not warped or had any fitment issues. No leaks only thing was there was weld spatter that I wire brushed while doing mockup - dont bolt it right on - but go through it and you will be a happy camper

Re: Kevko oil pans anyone? [Re: DJVCuda] #1551997 12/23/13 06:08 PM 12/23/13 06:08 PM
Joined: Aug 2003 Posts: 1,123 Seaford Delaware JSR1485 super stock
JSR1485 super stock Joined: Aug 2003 Posts: 1,123 Seaford Delaware	I have one in my Street car and in my race car. No problems at all -fit good, good ground clerance and no leaks. Just make sure you adjust the oil pump pickup off the bottom of the pan.I used clay on the pickup and bolted thepan on the block to check & set it off the bottom. Switched to the dark side...

Re: Kevko oil pans anyone? [Re: cudadoug] #1551998 12/23/13 07:57 PM 12/23/13 07:57 PM
Joined: Jan 2003 Posts: 30,995 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 30,995 Oregon	I've used several Kevko pans. They are a good piece for the money. I had them build me a couple of custom pans for a project and they did nice work. Very easy guys to work with.

Re: Kevko oil pans anyone? [Re: AndyF] #1551999 12/23/13 08:21 PM 12/23/13 08:21 PM
Joined: Jan 2003 Posts: 6,266 Renton Washington T Triple Threat master
Triple Threat master T Joined: Jan 2003 Posts: 6,266 Renton Washington	I have the non Kick out version of that pan, I agree its a good piece for the money. Mine was on a 10.70 street strip small block. -Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA

Re: Kevko oil pans anyone? [Re: Triple Threat] #1552000 12/23/13 10:18 PM 12/23/13 10:18 PM
Joined: Aug 2003 Posts: 3,245 Between a rock & a hard place C cudadoug OP master
cudadoug OP master C Joined: Aug 2003 Posts: 3,245 Between a rock & a hard place	Quote: I have the non Kick out version of that pan, I agree its a good piece for the money. Mine was on a 10.70 street strip small block. This one? http://www.kevkoracing.com/images/M301_full.gif

Re: Kevko oil pans anyone? [Re: cudadoug] #1552001 12/23/13 10:25 PM 12/23/13 10:25 PM
Joined: Nov 2009 Posts: 3,410 Belpre,Ohio C CHAPPER master
CHAPPER master C Joined: Nov 2009 Posts: 3,410 Belpre,Ohio	I have used several of them over the years for Mopar & X brands. All fit well and worked fine. If you like drag racing, support your local track.

Re: Kevko oil pans anyone? [Re: cudadoug] #1552002 12/23/13 10:33 PM 12/23/13 10:33 PM
Joined: Nov 2004 Posts: 8,094 Sunnyvale, CA Jeepmon master
Jeepmon master Joined: Nov 2004 Posts: 8,094 Sunnyvale, CA	Quote: Anyone run this one? http://kevko.net/images/M301_302_large.jpg Do they fit?? Do they leak?? Thanks Thats the one I run on the 73... At first appearance, the welds are just "ok".. its no where near as clean or pretty as the milodon pan, but it fits well, doesnt hang down as low as the milodon and is less expensive.. I would definitely buy another one, if I was shopping for one.. 73 Duster 360 stroker http://www.cardomain.com/ride/2594657

Re: Kevko oil pans anyone? [Re: cudadoug] #1552003 12/23/13 11:35 PM 12/23/13 11:35 PM
Joined: Jan 2003 Posts: 6,266 Renton Washington T Triple Threat master
Triple Threat master T Joined: Jan 2003 Posts: 6,266 Renton Washington	Quote: Quote: I have the non Kick out version of that pan, I agree its a good piece for the money. Mine was on a 10.70 street strip small block. This one? http://www.kevkoracing.com/images/M301_full.gif Yes, the kickout version wasn't offered when I bought mine. I would have bought it if it was. -Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA

Re: Kevko oil pans anyone? [Re: Triple Threat] #1552004 12/24/13 12:54 AM 12/24/13 12:54 AM
Joined: Oct 2009 Posts: 1,267 North, Alabama D-50 pro stock
D-50 pro stock Joined: Oct 2009 Posts: 1,267 North, Alabama	I am also running the Kevko without the kickouts, it is a 6 qt. pan. It fit good with no leaks so far. 7969155-CIMG0081.JPG (96 downloads) 1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...

Re: Kevko oil pans anyone? [Re: D-50] #1552005 12/24/13 01:31 AM 12/24/13 01:31 AM
Joined: Jan 2003 Posts: 3,719 Space Station #5 471Magnum master
471Magnum master Joined: Jan 2003 Posts: 3,719 Space Station #5	I'm running one of the 301 pans as well. Ugly as can be, but functionally it's perfect. Good pan for the money. -Jim I can fix it... my old man is a television repairman. He's got the ultimate set of tools... I can fix it. Currently Mopar-less

Re: Kevko oil pans anyone? [Re: D-50] #1552006 12/24/13 05:38 PM 12/24/13 05:38 PM
Joined: Jan 2003 Posts: 6,266 Renton Washington T Triple Threat master
Triple Threat master T Joined: Jan 2003 Posts: 6,266 Renton Washington	Here is my pan: Kevko Pickup, needed tweeked but no big deal. 5 minutes and a propane torch had it dialed in. I've been toying with the idea of cutting it apart and deepening it another 3/4 or 1 inch. -Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA

Re: Kevko oil pans anyone? [Re: Triple Threat] #1552007 12/24/13 05:57 PM 12/24/13 05:57 PM
Joined: Aug 2003 Posts: 3,245 Between a rock & a hard place C cudadoug OP master
cudadoug OP master C Joined: Aug 2003 Posts: 3,245 Between a rock & a hard place	Good info here...as always. Thanks! Thanks Dustin... great pics.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1