ATI Treemaster converters - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech ATI Treemaster converters

Print Thread

ATI Treemaster converters #1476757 07/31/13 01:32 AM 07/31/13 01:32 AM
Joined: Dec 2006 Posts: 4,647 aotearoa rebel OP master
rebel OP master Joined: Dec 2006 Posts: 4,647 aotearoa	anybody had experiance with these verters? i'm looking to buy a verter for a project i have in the wings & have been offered one of these units. it only has 50 documented runs on it. i know they're custom made for the application but the stall is in the ballpark for what i want & the price is less than half the going rate for a new one. just doing some research before i contemplate buying. it was behind a 605 cubed Hemi producing 850 hp & stalled at 5000, i'm looking at about 600 hp & wanting a stall in the low mid 4's. who runs these verters?

Re: ATI Treemaster converters [Re: rebel] #1476758 07/31/13 08:39 AM 07/31/13 08:39 AM
Joined: Jun 2007 Posts: 2,646 Plymouth Meeting, PA bigtimeauto Trophy Winner
bigtimeauto Trophy Winner Joined: Jun 2007 Posts: 2,646 Plymouth Meeting, PA	If you buy a converter that is not built for your combination what will you really save? BB, TT5,Procharged 3300lb Street Car 4.79/154

Re: ATI Treemaster converters [Re: rebel] #1476759 07/31/13 08:40 AM 07/31/13 08:40 AM
Joined: Jan 2003 Posts: 17,918 Akron, Ohio ProSport I Live Here
ProSport I Live Here Joined: Jan 2003 Posts: 17,918 Akron, Ohio	That's all I've ever ran in 3 different cars and loved all 3 of them. 2 of them were 9 second street/strip cars. 1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual

Re: ATI Treemaster converters [Re: ProSport] #1476760 07/31/13 09:46 AM 07/31/13 09:46 AM
Joined: Sep 2003 Posts: 2,008 Sweet Home Alabama M MRMOPAR622 top fuel
MRMOPAR622 top fuel M Joined: Sep 2003 Posts: 2,008 Sweet Home Alabama	ATI Tree Master Converters PS It would not be a bad idea to get the number off the converter(it should have a card with the # on it) and call ATI,if it is not close enough for what you need they can get it close enough to make it work! Last edited by MRMOPAR622; 07/31/13 09:47 AM. "To Be The Man'You Have Got To Beat The Man" "T/D and Pro-Bracket Racer"

Re: ATI Treemaster converters [Re: MRMOPAR622] #1476761 07/31/13 11:02 AM 07/31/13 11:02 AM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	Quote: ... call ATI,if it is not close enough for what you need they can get it close enough to make it work! For me, ATI's only an hour's drive away. For the OP, they're about half way around the world. That makes shipping a converter back for a stall config change a lot less cost effective, I suspect.

Re: ATI Treemaster converters [Re: rebel] #1476762 07/31/13 11:11 AM 07/31/13 11:11 AM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	I have had great luck with the ATI converters for years and years....only a few customer service issues ( promises not kept), but all in all, very happy with the Treemasters. Almost all my customers run them. RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Re: ATI Treemaster converters [Re: CompWedgeEngines] #1476763 07/31/13 02:23 PM 07/31/13 02:23 PM
Joined: Jul 2010 Posts: 679 COLUMBUS, OH W Whompin_Wedge mopar
Whompin_Wedge mopar W Joined: Jul 2010 Posts: 679 COLUMBUS, OH	ATI is the only whay to go!! Casey

Re: ATI Treemaster converters [Re: Whompin_Wedge] #1476764 07/31/13 05:27 PM 07/31/13 05:27 PM
Joined: Jun 2007 Posts: 2,646 Plymouth Meeting, PA bigtimeauto Trophy Winner
bigtimeauto Trophy Winner Joined: Jun 2007 Posts: 2,646 Plymouth Meeting, PA	Quote: ATI is the only whay to go!! Casey Keep telling yourself that BB, TT5,Procharged 3300lb Street Car 4.79/154

Re: ATI Treemaster converters [Re: BradH] #1476765 07/31/13 06:09 PM 07/31/13 06:09 PM
Joined: Sep 2003 Posts: 2,008 Sweet Home Alabama M MRMOPAR622 top fuel
MRMOPAR622 top fuel M Joined: Sep 2003 Posts: 2,008 Sweet Home Alabama	Quote: Quote: ... call ATI,if it is not close enough for what you need they can get it close enough to make it work! For me, ATI's only an hour's drive away. For the OP, they're about half way around the world. That makes shipping a converter back for a stall config change a lot less cost effective, I suspect. I did not notice that,but if its an ATI it has a card with it that has the converter number on it,and it you give them a call before you buy it they can tell you for sure if it will work or not.And if it needs a stall change can give you a close price on what the total cost will be.I changed my engine combination once(went from 915-440-1 heads) with my older ATI and they told me I could get by with it and make it work with a gear change. "To Be The Man'You Have Got To Beat The Man" "T/D and Pro-Bracket Racer"

Re: ATI Treemaster converters [Re: bigtimeauto] #1476766 07/31/13 06:27 PM 07/31/13 06:27 PM
Joined: Jul 2010 Posts: 679 COLUMBUS, OH W Whompin_Wedge mopar
Whompin_Wedge mopar W Joined: Jul 2010 Posts: 679 COLUMBUS, OH	Quote: Quote: ATI is the only whay to go!! Casey Keep telling yourself that LOL I am assuming your not a fan.. To each his own Casey

Re: ATI Treemaster converters [Re: Whompin_Wedge] #1476767 07/31/13 09:14 PM 07/31/13 09:14 PM
Joined: Jul 2005 Posts: 1,162 s e mich ro23car super stock
ro23car super stock Joined: Jul 2005 Posts: 1,162 s e mich	i can say my expierience was not a pleasureable one. thas why i have a new 9in that is supposed to stall around 4500 for sale.

Re: ATI Treemaster converters [Re: ro23car] #1476768 08/01/13 11:50 AM 08/01/13 11:50 AM
Joined: Jan 2003 Posts: 4,152 SO. CAL. 7 70blackfish master
70blackfish master 7 Joined: Jan 2003 Posts: 4,152 SO. CAL.	I have one, love it. runs cool temp too on the street.

Re: ATI Treemaster converters [Re: ro23car] #1476769 08/01/13 06:43 PM 08/01/13 06:43 PM
Joined: Jan 2012 Posts: 35 Mi USA D Dyno Donnie member
Dyno Donnie member D Joined: Jan 2012 Posts: 35 Mi USA	How much for that 9" Is it for a 727

Re: ATI Treemaster converters [Re: rebel] #1476770 08/01/13 08:28 PM 08/01/13 08:28 PM
Joined: Jan 2003 Posts: 6,591 Canton, Ohio S Sport440 master
Sport440 master S Joined: Jan 2003 Posts: 6,591 Canton, Ohio	ATI , has one of the best reputations around my area. I rank them right up there with the bests. I would Try the vert first to see will it will stall behind your combo if thats possible. If not Call ATI and get there opinion on it.

Re: ATI Treemaster converters [Re: Sport440] #1476771 08/02/13 02:27 PM 08/02/13 02:27 PM
Joined: Jan 2003 Posts: 3,831 N.E. Ohio 6bblFLASH master
6bblFLASH master Joined: Jan 2003 Posts: 3,831 N.E. Ohio	Quote: ATI , has one of the best reputations around my area. I rank them right up there with the bests. I would Try the vert first to see will it will stall behind your combo if thats possible. If not Call ATI and get there opinion on it. Have nothing but praise about my ATI converter. Same one since 1991. Probably 2,500 runs. Works just like the day I ordered it 70` Cuda`,440 6BBL Jerico,Dana 4.56 Still on 93 Pump Gas 9.87 @ 136/1.31-60ft.`09 Mopar Nationals PASSON PERFORMANCE "Stick-Shift" Champ! 2013 StickShift Challenge Winner@ Mopar Nationals!

Re: ATI Treemaster converters [Re: Dyno Donnie] #1476772 08/02/13 04:49 PM 08/02/13 04:49 PM
Joined: Jul 2005 Posts: 1,162 s e mich ro23car super stock
ro23car super stock Joined: Jul 2005 Posts: 1,162 s e mich	Quote: How much for that 9" Is it for a 727 yes it is for a 727 and i sent you a pm.

Re: ATI Treemaster converters [Re: ro23car] #1476773 08/02/13 06:05 PM 08/02/13 06:05 PM
Joined: Jan 2003 Posts: 19,367 Las Vegas Al_Alguire I Live Here
Al_Alguire I Live Here Joined: Jan 2003 Posts: 19,367 Las Vegas	Been very happy with every ATI converter I have purchased. They have won a lot of rounds for me. Having said that get the serial number and call ATI and see if it will work for you or not. Easy enough to do and the serial number is on the converter. "I am not ashamed to confess I am ignorant of what I do not know." "It's never wrong to do the right thing"

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1