408 stroker build - which windage tray? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 408 stroker build - which windage tray?

Print Thread

Page 2 of 2

1

2

Re: 408 stroker build - which windage tray? [Re: moparacer] #1346137 12/07/12 08:36 PM 12/07/12 08:36 PM
Joined: Nov 2004 Posts: 7,647 Houston Texas PAINT IT BLACK OP Got a CHIP on my shoulder
PAINT IT BLACK OP Got a CHIP on my shoulder Joined: Nov 2004 Posts: 7,647 Houston Texas	Quote: Quote: Crank scraper, preferably with a 7-8 qt. pan but running less than that. Scraper may need "fitting". Ishihara-Johnson Crank Scrapers Decided to go with a crank scraper with these guys after studying their site & talking with the guy. We agreed a windage tray was unnecessary/ potentially counter productive in my case.

Re: 408 stroker build - which windage tray? [Re: PAINT IT BLACK] #1346138 12/07/12 11:06 PM 12/07/12 11:06 PM
Joined: Oct 2003 Posts: 1,409 Ont. Canada 10.90 Racer super street
10.90 Racer super street Joined: Oct 2003 Posts: 1,409 Ont. Canada	Quote: Why would you run no oil control besides baffling on the 408 but do it on the 360? Just curious. The 408 is built that way...... The 360 is a little SS projrct I'm trying to get as much hp out of as I can.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1