360 Magnum converter weight set instuctions?
#1267144
07/13/12 10:11 PM
07/13/12 10:11 PM
|
Joined: Jul 2012
Posts: 12
beleneagle
OP
member
|
OP
member
Joined: Jul 2012
Posts: 12
|
Hi Guys! I just received a P5249843 360 magnum balance weight and positioning template package, and didn't get the template! Does anyone here happen to have a copy, or can tell me where the weights need to go?
Many Thanks
David
Last edited by beleneagle; 07/15/12 01:38 PM.
|
|
|
Re: 360 Magnum converter weight set instuctions?
[Re: beleneagle]
#1267146
07/14/12 08:44 AM
07/14/12 08:44 AM
|
Joined: Feb 2004
Posts: 1,012 indiana
mcmopars
super stock
|
super stock
Joined: Feb 2004
Posts: 1,012
indiana
|
Quote:
Hi Guys! I just received a P5249843 magnum 360 balance weight and positioning template package, and didn't get the template! Does anyone here happen to have a copy, or can tell me where the weights need to go?
Many Thanks
David
i looked for my old template,but no such luck.send it back and get a new one or buy a weighted flex plate.b/m makes one for @ $80.00
|
|
|
Re: 360 Magnum converter weight set instuctions?
[Re: BulletBob]
#1267153
07/17/12 01:05 AM
07/17/12 01:05 AM
|
Joined: Jul 2012
Posts: 12
beleneagle
OP
member
|
OP
member
Joined: Jul 2012
Posts: 12
|
Quote:
David, Why can't you use a stock 5.9 Magnum flexplate? Are you using a small pattern convertor? I'm not a WalMart employee but I've done quite a few 5.9 Mag conversions & only trying to help.
I have the stock flexplate, but it is my understanding the converter had weights welded to them till they changed the flexplate in 96', and mine is a 94'. Since the engine that I'm replacing is a 318, I need to add the weights to the converter. Right? I'm running a 904 tranny for now.
David
|
|
|
Re: 360 Magnum converter weight set instuctions?
[Re: John_Kunkel]
#1267161
07/25/12 02:10 AM
07/25/12 02:10 AM
|
Joined: Jul 2012
Posts: 12
beleneagle
OP
member
|
OP
member
Joined: Jul 2012
Posts: 12
|
This is the diagram showing the proper placement of the weights.
David
Last edited by beleneagle; 07/25/12 02:13 AM.
|
|
|
Re: 360 Magnum converter weight set instuctions?
[Re: beleneagle]
#1267162
07/25/12 02:17 AM
07/25/12 02:17 AM
|
Joined: Jul 2012
Posts: 12
beleneagle
OP
member
|
OP
member
Joined: Jul 2012
Posts: 12
|
The instructions for diagram in the above post is in this attachment. Here is a picture of the two different Magnum flexplates with the 360 on the right. And here's a 360 LA flywheel drilling diagram.. David
Last edited by beleneagle; 07/25/12 02:25 AM.
|
|
|
Re: 360 Magnum converter weight set instuctions?
[Re: beleneagle]
#1267163
07/25/12 02:27 AM
07/25/12 02:27 AM
|
Joined: Jul 2012
Posts: 12
beleneagle
OP
member
|
OP
member
Joined: Jul 2012
Posts: 12
|
Here is mine after adding the weights (which are alot thicker than the single factory weight): David I hope this helps anyone crazy enough to do this (Like me)!
Last edited by beleneagle; 07/25/12 02:51 AM.
|
|
|
|
|