Where is the best place to get a gasket that fits the p4876548 SB racing water pump? We had been getting parts from Gaerte, but cant get ahold of them for some reason. I tried Mancini and Hughes. Gonna try Stanton tomorrow. Any other suggestions? THANKS, Bob P.

Does anybody have a part number for the gasket?

Is this pump the one for the short deck R block...
all I use is the Mopar black RTV

Honestly, the last set I recieved on my Proform small block pump turned to mush when the coolant hit them. I had to pull the plate and the pump all back off thinking the rtv was leaking, and it was the gaskets, not the rtv...Now I have blue rtv on it, and no gaskets and no leaks. I wasn't able to order any either when I tried to order some from Hughes. They were out and they said for some time they haven't had any.

If it is a good flat machined surface, couldnt you use anerobic sealer and no gasket. That stuf is GREAT as long as it is very flat and clean.

Mr P, I believe this pump could be used on any cast iron block, but you must use the aftermarket "sand cast" front cover. This one is on an aluminum block. It is a Zeus Casting. Mancini said they are discontinued. I was hoping that someone might have one on their shelf. I would prefer a gasket, but it sounds like RTV might be the way to go... THANKS, Bob P.

dont believe everything mancini tells you!! they told me that milodon was discontinuing the one piece oil pan gasket for a 360 block, called milodon and they said no such thing that it was discontinued!! call around heck try jegs or sumit?

Burnincircles I have a couple different water pump gaskets.

Is this what you are looking for?

That does appear to be the correct gasket. I would be interested in purchasing one. How can I get ahold of you?

Get two.
They can't be too expensive and next time , you'll have one on hand.