The ignition switch/ title lamps would not be on all the time the way the factory wired it...It's on the timed circuit of the relay...Which means it's tripped when you open the doors then times out after the doors are closed....
You could wire them to an accessory circuit and make it work whenever the key is turned {while you're running} but without the time delay relay{or other provisions} you'd lose the feature of the ignition being illuminated {to place the key before you actually find it} in the dark...

Thanks, at this time I don't have the ignition key light, so I will connect the switch title lamp to ACC for now. Let's see, what is collectible over the time (harness/delay relay)..

Here is an other good pic of the needed cable, which I borrowed maybe from here (sale section) which was then labeled dash map light.

CU

walkAbout

Hello I know this is an old thread.but what is the name of the company that is restoring the complete dash? thanks

Hello ! I just got on here and saw nobody replied...Strange, anyhow... There's many qualified members/companies on here...I see you're in NY so these guys are somewhat close and are doing some great high level work... Give them a call... instrument specialties

Great thread to help figure out dash wiring.