Quote:

---

Strokerscamp I'm currently running an A-body 8 3/4 with moser axles. 15x10 welds
with 6.5 backspace. Current tires are 28x11.5 et drags. They fit very easily. I would like to run something a little bigger if possible. Something with a 12.5 tread width and 29 tall would fit. But my question is can I run a radial that tall or will it grow and hit my front fender lip at high speed.
Plus I don't really know all the drag radial size options. Thanks.

---

If you have 5/8" clearance they shouldnt hit... IF
necessary you can put a spacer plate in front of the
front spring hanger to space the axle back some...
dont get carried away with this unless you change
the drive shaft length

Quote:

---

Mr P.
That won't work with the spring relocation kit as it does away with the stock mounts and is a matter of drilling 2 holes. Good idea otherwise though.
Looking at the mickey thompson radial sizes though and they pretty much go from a 28" tire to a 29.5 or 30". Not much in between.

---

Quote:

---

I have 30x9 Hoosier radial slicks on my car with stock wheelwell, spring location, and stock wheel tubs.

---