Quote:
Strokerscamp I'm currently running an A-body 8 3/4 with moser axles. 15x10 welds
with 6.5 backspace. Current tires are 28x11.5 et drags. They fit very easily. I would like to run something a little bigger if possible. Something with a 12.5 tread width and 29 tall would fit. But my question is can I run a radial that tall or will it grow and hit my front fender lip at high speed.
Plus I don't really know all the drag radial size options. Thanks.
Quote:
Mr P.
That won't work with the spring relocation kit as it does away with the stock mounts and is a matter of drilling 2 holes. Good idea otherwise though.
Looking at the mickey thompson radial sizes though and they pretty much go from a 28" tire to a 29.5 or 30". Not much in between.
Quote:
I have 30x9 Hoosier radial slicks on my car with stock wheelwell, spring location, and stock wheel tubs.
