Re: Apologies - what will this thing run?
[Re: boscosis]
#1018067
06/21/11 10:41 PM
06/21/11 10:41 PM
|
Joined: Aug 2006
Posts: 2,141 junction city oregon
viperblue72
top fuel
|
top fuel
Joined: Aug 2006
Posts: 2,141
junction city oregon
|
I will guess [Email]11.5@116[/Email]but I don't know how much a Satellite weighs.
Last edited by viperblue72; 06/21/11 10:42 PM.
|
|
|
Re: Apologies - what will this thing run?
[Re: boscosis]
#1018070
06/21/11 11:10 PM
06/21/11 11:10 PM
|
Joined: Jan 2003
Posts: 6,266 Renton Washington
Triple Threat
master
|
master
Joined: Jan 2003
Posts: 6,266
Renton Washington
|
low 12's I bet. Maybe high 11's if it leaves well. Fairly heavy car with not much gear or converter. That engine in a dedicated drag car would go 10's.
-Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA
|
|
|
Re: Apologies - what will this thing run?
[Re: Crizila]
#1018072
06/22/11 12:25 AM
06/22/11 12:25 AM
|
Joined: Apr 2010
Posts: 93 CA
mojavered
member
|
member
Joined: Apr 2010
Posts: 93
CA
|
11.93 What do we win if we get the closest?
71 Challenger RT 440 / 727 / 8.75
|
|
|
Re: Apologies - what will this thing run?
[Re: ProStock1320]
#1018074
06/22/11 01:22 AM
06/22/11 01:22 AM
|
Joined: Jan 2003
Posts: 2,697 Renton Wa
topfueldart
master
|
master
Joined: Jan 2003
Posts: 2,697
Renton Wa
|
11.48 @ 120 with a 1.80 60' 318, stock 1.88 heads, stock 904, Pump Gas, 13 lbs of boost.
9.94 @ 134, 318 on pump gas, 14 lbs w/ Eddies, transbrake 727, 3600 lbs, 3.54 gear and 28's.
|
|
|
Re: Apologies - what will this thing run?
[Re: viperblue72]
#1018076
06/22/11 02:00 AM
06/22/11 02:00 AM
|
Joined: Jul 2006
Posts: 4,319 Puyallup, WA
StealthWedge67
master
|
master
Joined: Jul 2006
Posts: 4,319
Puyallup, WA
|
Little less gear and converter than my car. little less cam, but it's a roller vs. my flat tappet solid. Stealth heads vs. eddys. Same intake & headers. smaller carb... I'll guess 12.60 first time out.
My 67 weighs 3620 without me. Steel wheels on my car.
LemonWedge - Street heavy / Strip ready - 11.07 @ 120
|
|
|
Re: Apologies - what will this thing run?
[Re: StealthWedge67]
#1018077
06/22/11 03:30 AM
06/22/11 03:30 AM
|
Joined: Jan 2003
Posts: 27,421 Balt. Md
383man
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 27,421
Balt. Md
|
Its not much off from my old eng. I had the .557 solid cam and 906 heads I worked. But the gear will hold the et down a little as I ran 4.30's with 30" tall tires. Mine went 11.49 best so I will guess 11.90's first time out. Good luck , Ron
Last edited by 383man; 06/22/11 03:32 AM.
|
|
|
Re: Apologies - what will this thing run?
[Re: 383man]
#1018078
06/22/11 07:55 AM
06/22/11 07:55 AM
|
Joined: Jan 2003
Posts: 9,996 Frostbitefalls MN (Rocky&Bullw...
gregsdart
master
|
master
Joined: Jan 2003
Posts: 9,996
Frostbitefalls MN (Rocky&Bullw...
|
I'm betting low twelves with a mph north of 112, mid 11 sec capability with gears, better converter and big slicks. Very good choices on the motor, It should stand tall among similar builds.
8..603 156 mph best, 2905 lbs 549, indy 572-13, alky
|
|
|
Re: Apologies - what will this thing run?
[Re: boscosis]
#1018080
06/22/11 11:11 AM
06/22/11 11:11 AM
|
Joined: Dec 2006
Posts: 1,178 Indy
FlyFish
super stock
|
super stock
Joined: Dec 2006
Posts: 1,178
Indy
|
Quote:
First time out I know will be interesting.
'66 Satellite, 3.55 gear, 3200 converter (estimate). 451, stock RPM heads, 10:1, solid roller 246/254 with 543/561 lift, performer RPM intake, 750 DP, 1 7/8 headers, 3" bullet mufflers.
This is my drive it every few months car; but I will take it to the track to see what it runs. I'll use either drag radials or slicks.
Thanks
Let me preface this with I DON’T KNOW BIG BLOCKS…but I would think you would hit high 11’s.
FWIW, my small block stroker has almost the exact same compression, cam, carb, head (Edelbrock), intake. The only big difference is I’m short about 40 cubes, I run a 4.10 gear and weigh probably about 400lbs less (3250#)…it runs high 10’s.
67 Barracuda street car, 408, e85, 1.38 60', 6.44 @105.9 in the 1/8 mile, 10.19 @130.5 in the 1/4...so far....
|
|
|
Re: Apologies - what will this thing run?
[Re: ProStock1320]
#1018083
06/22/11 04:11 PM
06/22/11 04:11 PM
|
Joined: Nov 2009
Posts: 2,177 ill
dennismopar73
top fuel
|
top fuel
Joined: Nov 2009
Posts: 2,177
ill
|
Quote:
12.65 DAMHIK. Anyone in the market for a 66 Satellite?
yes me!! but need money first
|
|
|
|
|