Quote:

We'll if there's a way to make it work can someone fill me on on what to modify? I'll try that otherwise I'll start hunting down a replacement steering column in preparation to put my original steering components back.





The basic problem as I stated is that currently the rack is mounted offset to the left. Thats a normal problem when using front mounted racks in A bodys withn 440,s or Hemis. Its probably the same with SB,s

With your rack being offset, instead of having equal turns lock to lock, from a dead center position. If Unisteer used a typical rack, and it sounds like they did.

Installing one offset will make your turns from lock to lock unequal. Your left turning radius will be much shorter then your right turning radius.

Is this the case with your rack? If so I can give you some ideas on how to fix it. Ive seen the offset problem fixed on the front steer racks.

Not sure if the same can be done to your rear steer without looking at the available working area.