mis-aligned clutch plates: 8 3/4 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer mis-aligned clutch plates: 8 3/4

Print Thread

Re: mis-aligned clutch plates: 8 3/4 [Re: BRONZEBEE] #969747 04/09/11 11:29 AM 04/09/11 11:29 AM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Quote: I had a cone style do that to me after a rebuild.Install the other axle and hold it still,or put on ground with the tire.Slide in the other axle until it stops then turn with a large pry bar on the wheel studs and push while turning. [/quote Do this.. I've do it quite a few times, it works... "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Entire Thread
Subject	Posted By	Posted
mis-aligned clutch plates: 8 3/4	3ddart	04/09/11 12:19 PM
Re: mis-aligned clutch plates: 8 3/4	JohnRR	04/09/11 02:43 PM
Re: mis-aligned clutch plates: 8 3/4	BRONZEBEE	04/09/11 02:59 PM
Re: mis-aligned clutch plates: 8 3/4	Mopar_Country	04/09/11 03:07 PM
Re: mis-aligned clutch plates: 8 3/4	1_WILD_RT	04/09/11 03:29 PM
Re: mis-aligned clutch plates: 8 3/4	3ddart	04/09/11 03:52 PM
Re: mis-aligned clutch plates: 8 3/4	1_WILD_RT	04/09/11 04:02 PM
Re: mis-aligned clutch plates: 8 3/4	JohnRR	04/09/11 04:12 PM
Re: mis-aligned clutch plates: 8 3/4	Mopar_Country	04/09/11 04:26 PM
Re: mis-aligned clutch plates: 8 3/4	3ddart	04/10/11 10:36 PM
Re: mis-aligned clutch plates: 8 3/4	BRONZEBEE	04/11/11 03:34 AM
Re: mis-aligned clutch plates: 8 3/4	3ddart	04/11/11 12:52 PM
Re: mis-aligned clutch plates: 8 3/4	Mopar_Country	04/09/11 02:54 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1