mis-aligned clutch plates: 8 3/4 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer mis-aligned clutch plates: 8 3/4

Print Thread

mis-aligned clutch plates: 8 3/4 #969742 04/09/11 08:19 AM 04/09/11 08:19 AM
Joined: Jan 2005 Posts: 1,466 malvern, ohio 3 3ddart OP pro stock
3ddart OP pro stock 3 Joined: Jan 2005 Posts: 1,466 malvern, ohio	checking out an 8 3/4 axle with a limited-slip and after pulling the axles i couldn't re-install the drivers side all the way. after closer inspection i found the inner set of clutch plates moved to where they are not aligned with the outer set. i tried to move them with no luck. any ideas on getting them back in alignment? thanks, dave

Entire Thread
Subject	Posted By	Posted
mis-aligned clutch plates: 8 3/4	3ddart	04/09/11 12:19 PM
Re: mis-aligned clutch plates: 8 3/4	JohnRR	04/09/11 02:43 PM
Re: mis-aligned clutch plates: 8 3/4	BRONZEBEE	04/09/11 02:59 PM
Re: mis-aligned clutch plates: 8 3/4	Mopar_Country	04/09/11 03:07 PM
Re: mis-aligned clutch plates: 8 3/4	1_WILD_RT	04/09/11 03:29 PM
Re: mis-aligned clutch plates: 8 3/4	3ddart	04/09/11 03:52 PM
Re: mis-aligned clutch plates: 8 3/4	1_WILD_RT	04/09/11 04:02 PM
Re: mis-aligned clutch plates: 8 3/4	JohnRR	04/09/11 04:12 PM
Re: mis-aligned clutch plates: 8 3/4	Mopar_Country	04/09/11 04:26 PM
Re: mis-aligned clutch plates: 8 3/4	3ddart	04/10/11 10:36 PM
Re: mis-aligned clutch plates: 8 3/4	BRONZEBEE	04/11/11 03:34 AM
Re: mis-aligned clutch plates: 8 3/4	3ddart	04/11/11 12:52 PM
Re: mis-aligned clutch plates: 8 3/4	Mopar_Country	04/09/11 02:54 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1