383 big block block and rotating assembly..

Print Thread

383 big block block and rotating assembly.. #967230 04/05/11 08:54 PM 04/05/11 08:54 PM
Joined: Jan 2011 Posts: 79 Fredericksburg,Virginia 1 1 Bad Duster OP member
1 Bad Duster OP member 1 Joined: Jan 2011 Posts: 79 Fredericksburg,Virginia	I found a 383 big block with Eagle Crank H-beam rods and after market pistons.I was wondering what stroke cranks does eagle make for the 383s.The guy said it was a stock stroke but I couldn't find a 3.375 stroke that eagle made.. I found 3.75-3.91-4.15and 4.25stroker cranks. If its a 3.75 stroke that makes its a 426-432 bored 30 over right. Last edited by 1 Bad Duster; 04/05/11 09:39 PM.

Entire Thread
Subject	Posted By	Posted
383 big block block and rotating assembly..	1 Bad Duster	04/06/11 12:54 AM
Re: 383 big block block and rotating assembly..	RapidRobert	04/06/11 04:15 AM
Re: 383 big block block and rotating assembly..	NachoRT74	04/06/11 05:26 AM
Re: 383 big block block and rotating assembly..	70Cuda383	04/06/11 02:19 PM
Re: 383 big block block and rotating assembly..	NachoRT74	04/06/11 02:58 PM
Re: 383 big block block and rotating assembly..	1 Bad Duster	04/06/11 11:48 PM
Re: 383 big block block and rotating assembly..	RapidRobert	04/07/11 12:37 AM
Re: 383 big block block and rotating assembly..	1 Bad Duster	04/07/11 02:08 AM
Re: 383 big block block and rotating assembly..	RapidRobert	04/07/11 02:13 AM
Re: 383 big block block and rotating assembly..	1 Bad Duster	04/07/11 02:31 AM

Hop To