Cam timing vs distributor timing - New info

Print Thread

Re: Cam timing vs distributor timing [Re: buildanother] #965303 04/04/11 03:53 PM 04/04/11 03:53 PM
Joined: Jan 2003 Posts: 559 Scottsdale, AZ K kenz OP mopar
kenz OP mopar K Joined: Jan 2003 Posts: 559 Scottsdale, AZ	Quote: Nitrousn is right about that possible vac leak, and maybe a 318 with a little cam that really isn't very little, may need a looser torque conv. The only vaccuum line hooked up goes to the hand held gauge. We sprayed carb cleaner all around the carb and intake and it caused no change in idle. Any better way to check? The cam's spec are pretty mild, 204 int./214 exh. duration and 0.420 int./0.442 exh lift. Lobe separation is 112. Thanks, ken

Entire Thread
Subject	Posted By	Posted
Cam timing vs distributor timing - New info	kenz	04/03/11 10:18 PM
Re: Cam timing vs distributor timing	NITROUSN	04/03/11 10:44 PM
Re: Cam timing vs distributor timing	kenz	04/03/11 11:11 PM
Re: Cam timing vs distributor timing	RapidRobert	04/03/11 11:14 PM
Re: Cam timing vs distributor timing	RapidRobert	04/03/11 11:06 PM
Re: Cam timing vs distributor timing	kenz	04/04/11 01:41 AM
Re: Cam timing vs distributor timing	kenz	04/04/11 01:45 AM
Re: Cam timing vs distributor timing	RapidRobert	04/04/11 03:54 AM
Re: Cam timing vs distributor timing	1_WILD_RT	04/04/11 04:04 AM
Re: Cam timing vs distributor timing	kenz	04/04/11 03:55 PM
Re: Cam timing vs distributor timing	kenz	04/05/11 03:04 PM
Re: Cam timing vs distributor timing	kenz	04/10/11 08:25 PM
Re: Cam timing vs distributor timing	RapidRobert	04/10/11 11:07 PM
Re: Cam timing vs distributor timing	kenz	04/15/11 10:28 PM
Re: Cam timing vs distributor timing	RapidRobert	04/15/11 11:07 PM
Re: Cam timing vs distributor timing	kenz	04/15/11 11:39 PM
Re: Cam timing vs distributor timing	RapidRobert	04/15/11 11:55 PM
Re: Cam timing vs distributor timing	kenz	04/16/11 02:28 AM
Re: Cam timing vs distributor timing	Sport440	04/03/11 11:43 PM
Re: Cam timing vs distributor timing	kenz	04/04/11 01:06 AM
Re: Cam timing vs distributor timing	RapidRobert	04/04/11 01:15 AM
Re: Cam timing vs distributor timing	buildanother	04/04/11 01:23 AM
Re: Cam timing vs distributor timing	kenz	04/04/11 07:53 PM

Hop To