I'm in the process of installing the distributor gear/oil pump drive back into my Magnum 5.9 motor. If the motor is sitting at TDC on the firing stroke, which way should the slot be facing once the distributor gear/oil pump drive is installed in the motor? I just want to make sure I get this right, so that when I install the distributor, it will line up correctly in the block. I looked in the service manual and did not see any mention of how to install and properly orient the distributor gear/oil pump drive. Does anyone have any good tips or documentation that they can share on this issue? The motor is a 1996 Magnum 5.9 in a Dodge Ram 2500.