too much cranking compression?

Print Thread

Re: too much cranking compression? [Re: jbc426] #946908 03/09/11 11:31 AM 03/09/11 11:31 AM
Joined: May 2006 Posts: 2,046 ky. K kenworth_goose top fuel
kenworth_goose top fuel K Joined: May 2006 Posts: 2,046 ky.	The last 360 I built was 10 to 1 and it had 240psi cranking. Also had a 508 purple shaft. Never had any issues running 97. It ran 12.40's in a 68 dart with a stock convertor and 3.91's.

Entire Thread
Subject	Posted By	Posted
too much cranking compression?	moturbopar	03/09/11 07:41 AM
Re: too much cranking compression?	70AARcuda	03/09/11 07:49 AM
Re: too much cranking compression?	moturbopar	03/09/11 07:54 AM
Re: too much cranking compression?	Kern Dog	03/09/11 07:58 AM
Re: too much cranking compression?	jbc426	03/09/11 08:26 AM
Re: too much cranking compression?	kenworth_goose	03/09/11 03:31 PM
Re: too much cranking compression?	GomangoCuda	03/09/11 03:39 PM
Re: too much cranking compression?	patrick	03/10/11 05:50 PM
Re: too much cranking compression?	451Mopar	03/09/11 08:28 AM
Re: too much cranking compression?	Pale_Roader	03/09/11 12:55 PM
Re: too much cranking compression?	patrick	03/10/11 05:46 PM
Re: too much cranking compression?	convertriple	03/10/11 04:13 AM
Re: too much cranking compression?	RapidRobert	03/10/11 04:17 AM
Re: too much cranking compression?	ahy	03/10/11 05:10 AM
Re: too much cranking compression?	RapidRobert	03/10/11 05:18 AM
Re: too much cranking compression?	moturbopar	03/10/11 05:33 AM
Re: too much cranking compression?	451Mopar	03/10/11 09:09 AM
Re: too much cranking compression?	moturbopar	03/10/11 05:10 PM
Re: too much cranking compression?	451Mopar	03/11/11 04:30 AM
Re: too much cranking compression?	moturbopar	03/11/11 05:11 AM

Hop To