Quote:

Bill, dont fret little buddy.... I have the milodon dual line kit in my car with 100% stock front suspension.

I do run a motor plate, but I use the stock passenger side motor mount as a limiter...



That oughta work just fine. I ran 1 limiter on my car with 1/4" plates front and rear until I put in the 572. Then I added one on the other side just to be sure the motor/trans weren't twisting.

I had the 1 limiter deal on the car for around 15 years with no drivetrain problems. Well, come to think of it, I did crack 1 Powerglide bellhousing after maybe 1500 passes. With the new motor and 2 limiters I broke 3 bellhousings this year.

If you do what Josh recommends I bet you'll be in hog heaven.