I bought a set of 15x7 Ralleys about 12 years ago from YO. I had them in the boxes until about 2 years ago when I installed them with new tires. Two of them had such a bad wabble that the manager of the tire shop had to call me in the back to show me how bad they were. He said to have them put on the rear of the car and he warned me that they would vibrate above 60mph or so. They do vibrate at about 75mph+. I have thought about taking them to a machine shop to see how much material it would take (off of the mounting surface) to square them back up but I am partially afraid of removing the material and them still being safe. Stockton Wheel says that the normal runout is .025" but I would bet that mine are out more than that after seeing them spun up on a tire balancer.


One of these days I will buy a new 15x8 set to replace the rears and set these aside.
These do accept the 70 trim rings.