Hey Guys,

I need to do a Heater Core bypass in my 1970 Super Bee 440 motor. As the heater hoses appear to be two sizes on this one (5/8" and 1/2"), do I just loop a small piece of the 5/8" over to the 1/2" fitting? (or is it vice-versa?).

Second question -- If I decide to bypass the heater permnanently by removing the 2 hose outlet fittings and replacing with plugs -- How hard is it to get off those fittings? I suspect they have been in there for years -- do these come out easily or are there tricks to doing this?

Thanks a lot for any tips on this!

--Stan