Quote:

with a 408 you only need to make a tick over 1hp per cubic inch which wouldnt be too hard with good aftermarket heads. could be done with a hyd flat tappet if you wanted to. If you got the scratch Id run a small hyd roller. nothing trick and it'll get the job done.



Which hyd flat tappet for a little more than 1hp/cid ??

Would be nice to have a 112 centerline to keep the idle nice, but I don't see anything like that in the range I'm looking at.

Last edited by autoxcuda; 11/02/10 03:47 PM.