440 "six pak" vs 440 "830 cfm annular" in bracket trim

Print Thread

Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim [Re: 67383scuda] #831963 10/17/10 04:43 PM 10/17/10 04:43 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	The 830 is small so in that case I would say the 6 pac but I hate running multiple carbs... I would go with a 1050 dom... JMO

Entire Thread
Subject	Posted By	Posted
440 "six pak" vs 440 "830 cfm annular" in bracket trim	67383scuda	10/17/10 08:25 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	MR_P_BODY	10/17/10 08:43 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	67383scuda	10/17/10 08:56 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	HYPER8oSoNic	10/18/10 05:31 AM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	GomangoCuda	10/18/10 11:43 AM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	Mr.Yuck	10/18/10 01:29 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	Cab_Burge	10/18/10 06:49 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	sshemi	10/18/10 07:16 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	GomangoCuda	10/18/10 07:47 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	67383scuda	10/18/10 07:56 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	an8sec70cuda	10/18/10 08:00 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	sixpackgut	10/18/10 08:06 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	an8sec70cuda	10/18/10 08:09 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	ZIPPY	10/18/10 08:19 PM
Re: 440 "six pak" vs 440 "830 cfm annular" in bracket trim	70BIRD	10/19/10 01:57 PM

Hop To