Quote:
I have a set like the bottom ones . the problem is the arms extend into the center of the spring which preventsnthe shoch going thru
Then you can make a custom set. All that should be needed is two jack screws, 4 nuts and then you would have to make two custom connecting plate to pass through the coil and around the shock.
Or you could do it quicker with the half-@ssed method by taking off the lower control arm, assembling the coil over to the upper strut tower and lower control arm and then lowering the front end to compress the coil over. Then with the lower control arm still assembled to the coil over try to bolt it back to the frame! DISCLAIMER: I AM NOT RECOMMENDING THIS!!!
Last edited by bwdst6; 09/30/10 12:31 PM.
