difference in dana with/without ABS

Print Thread

Re: difference in dana with/without ABS [Re: cptn60] #817958 10/02/10 02:18 PM 10/02/10 02:18 PM
Joined: Apr 2009 Posts: 3,426 Toronto M mshred OP master
mshred OP master M Joined: Apr 2009 Posts: 3,426 Toronto	Quote: Quote: I work on Ford vans all day and the only difference internally is the exciter ring on the carrier and it can be removed. Not sure as far as tube diameter though. Pinion bearings are different. The late phord60 uses 8.8 brgs. Unsure about pinion shaft diameter differences. Also the phord axle tubes neck down at the backing plate flange. Not a concern if narrowing the housing. Hope this helps so are the ford ones unusable then because of this ring and pinion issue?

Entire Thread
Subject	Posted By	Posted
difference in dana with/without ABS	mshred	09/30/10 01:28 AM
Re: difference in dana with/without ABS	runnerrt	09/30/10 03:18 AM
Re: difference in dana with/without ABS	mshred	09/30/10 03:23 AM
Re: difference in dana with/without ABS	runnerrt	09/30/10 04:27 AM
Re: difference in dana with/without ABS	mshred	09/30/10 03:12 PM
Re: difference in dana with/without ABS	theclutcher	09/30/10 03:44 PM
Re: difference in dana with/without ABS	theclutcher	09/30/10 03:47 PM
Re: difference in dana with/without ABS	mshred	09/30/10 08:18 PM
Re: difference in dana with/without ABS	DoctorDiff	09/30/10 08:22 PM
Re: difference in dana with/without ABS	mshred	09/30/10 08:55 PM
Re: difference in dana with/without ABS	mshred	10/02/10 02:35 PM
Re: difference in dana with/without ABS	theclutcher	10/02/10 03:11 PM
Re: difference in dana with/without ABS	mshred	10/02/10 06:18 PM
Re: difference in dana with/without ABS	theclutcher	10/02/10 11:02 PM
Re: difference in dana with/without ABS	cptn60	10/02/10 03:12 PM
Re: difference in dana with/without ABS	mshred	10/02/10 06:18 PM
Re: difference in dana with/without ABS	DoctorDiff	10/02/10 09:08 PM

Hop To