difference in dana with/without ABS

Print Thread

Re: difference in dana with/without ABS [Re: mshred] #817955 10/02/10 11:11 AM 10/02/10 11:11 AM
Joined: Mar 2005 Posts: 2,172 Ohio T theclutcher top fuel
theclutcher top fuel T Joined: Mar 2005 Posts: 2,172 Ohio	They are 3.125 tubes dia. Stock plates or caltracs, just have to elongate holes a bit to fit bigger ubolt. same as spring perches, just a small amount of grinding to fit larger tube. this was out of 92 dodge, is 45.5" end to end. add 5" for axle standout to give overall axle flange width of 50.5". 6228659-45.5dana008(Small).jpg (49 downloads) Last edited by theclutcher; 10/02/10 11:21 AM.

Entire Thread
Subject	Posted By	Posted
difference in dana with/without ABS	mshred	09/30/10 01:28 AM
Re: difference in dana with/without ABS	runnerrt	09/30/10 03:18 AM
Re: difference in dana with/without ABS	mshred	09/30/10 03:23 AM
Re: difference in dana with/without ABS	runnerrt	09/30/10 04:27 AM
Re: difference in dana with/without ABS	mshred	09/30/10 03:12 PM
Re: difference in dana with/without ABS	theclutcher	09/30/10 03:44 PM
Re: difference in dana with/without ABS	theclutcher	09/30/10 03:47 PM
Re: difference in dana with/without ABS	mshred	09/30/10 08:18 PM
Re: difference in dana with/without ABS	DoctorDiff	09/30/10 08:22 PM
Re: difference in dana with/without ABS	mshred	09/30/10 08:55 PM
Re: difference in dana with/without ABS	mshred	10/02/10 02:35 PM
Re: difference in dana with/without ABS	theclutcher	10/02/10 03:11 PM
Re: difference in dana with/without ABS	mshred	10/02/10 06:18 PM
Re: difference in dana with/without ABS	theclutcher	10/02/10 11:02 PM
Re: difference in dana with/without ABS	cptn60	10/02/10 03:12 PM
Re: difference in dana with/without ABS	mshred	10/02/10 06:18 PM
Re: difference in dana with/without ABS	DoctorDiff	10/02/10 09:08 PM

Hop To