Going from 4.10 to 4.30 how much RPM - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Going from 4.10 to 4.30 how much RPM

Print Thread

Re: Going from 4.10 to 4.30 how much RPM [Re: Sport440] #795887 09/08/10 08:54 PM 09/08/10 08:54 PM
Joined: Nov 2003 Posts: 7,348 Mt.Vernon ,Ohio VernMotor master
VernMotor master Joined: Nov 2003 Posts: 7,348 Mt.Vernon ,Ohio	I went from 4.30 to 4.10 it was about 200 rpm did,t make no diff in the et slip

Entire Thread
Subject	Posted By	Posted
Going from 4.10 to 4.30 how much RPM	10secGTX	09/08/10 04:20 AM
Re: Going from 4.10 to 4.30 how much RPM	Sport440	09/08/10 04:31 AM
Re: Going from 4.10 to 4.30 how much RPM	mopar_to_ya	09/08/10 04:42 AM
Re: Going from 4.10 to 4.30 how much RPM	70blackfish	09/08/10 05:22 AM
Re: Going from 4.10 to 4.30 how much RPM	V10nacuda	09/08/10 10:39 PM
Re: Going from 4.10 to 4.30 how much RPM	Sport440	09/08/10 10:45 PM
Re: Going from 4.10 to 4.30 how much RPM	VernMotor	09/09/10 12:54 AM
Re: Going from 4.10 to 4.30 how much RPM	Sport440	09/09/10 01:43 AM
Re: Going from 4.10 to 4.30 how much RPM	bonefish	09/09/10 10:13 PM
Re: Going from 4.10 to 4.30 how much RPM	sunroofgtx	09/10/10 05:25 AM
Re: Going from 4.10 to 4.30 how much RPM	cptn60	09/10/10 02:08 PM
Re: Going from 4.10 to 4.30 how much RPM	polyspheric	09/09/10 04:09 AM
Re: Going from 4.10 to 4.30 how much RPM	Sport440	09/09/10 06:03 AM
Re: Going from 4.10 to 4.30 how much RPM	Cab_Burge	09/09/10 07:38 AM
Re: Going from 4.10 to 4.30 how much RPM	10secGTX	09/09/10 02:28 PM
Re: Going from 4.10 to 4.30 how much RPM	ETASPEN	09/09/10 02:47 PM
Re: Going from 4.10 to 4.30 how much RPM	cptn60	09/09/10 07:00 PM
Re: Going from 4.10 to 4.30 how much RPM	polyspheric	09/09/10 03:05 PM
Re: Going from 4.10 to 4.30 how much RPM	BloFish	09/09/10 05:36 PM
Re: Going from 4.10 to 4.30 how much RPM	Cab_Burge	09/09/10 07:39 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1