Quote:

Quote:

Let Tim Goolsby @ Bullet pick your cam, you won't be disappointed One of the sharpest dudes in the biz.

Bullett (who are mostly the old UltraDyne gang) make awesome cams

Pretty sure Bullet is making the Hughes HR grinds








I would encourage you to switch over to a solid lifter while you are at it. It will be better everywhere.

The UltraDyne/Bullet 255 @.050 .582 lift flat tappet is a strong performer in a mild 440!

Dan Sullivan (DanBob) here on moparts has a mild 440 in his yellow duster that flat out honks!

- 10.60's at 126 @ 3450lbs N/A
- 9.40's @141 on NOS

- .055 over 440.
- 10.5 to 1 compression.
- MCH cnc Edelbrock RPM heads
- Mopar M1 Single Plane intake
- Ultradyne/Bullet cam .582 lift, 255 @ .050
- 1.5 rockers
- 4.10 gears / 315/60/15 drag radials
- SS springs
- 3450lbs race ready