Quote:

---

the 727 flexplate comes with 3 different bolt patterns...

11 1/8 and 10 inch...plus different bolt hole sizes...i dont see why it would not work.


check the bolt pattern on your converter...see if it is either of those two.

---

I'm pretty sure the larger dia of the 727 flexplate will hit the starter in the drive area.
Even using the B&M 360/904 flexplate, I've had to trim the nose on some mini-starters to clear. I've also had to trim the block in the pan rail area to put a 904 behind a 360 Mag block.