Quote:

Thanks,Sean! The PV I'm running is a 4.5. My vacuum is 6" at idle,in gear. RandyB



Tells me that the PV circuit is too small so you need
the added jet size to cover it up.... the carb has
been opened many times but I never measured the PV
holes... the carb was set on the dyno to the numbers
it has now
EDIT
I actually said it backwards the PV circuit is too
big... it might have a high flow PV and it could
use a standard... being that carb is old

Last edited by MR_P_BODY; 06/05/10 12:42 PM.