Quote:

---

Well,my SS springs are FINALLY in!!!!! A BIG thanks goes out to my buddy who helped me take the old leafs out and put in the new leafs!!!!!!

I do have a question...On the purch theres 3 holes,we put the dowel pin on the leafs in the middle hole and it looks like it moved my rear forward a inch or so.
My question is...Can I move it back to the back hole to get my tires more clearance in the front of the wheel well???

---

They should be in the middle hole, so thats ok, if i remember, the SS springs will have the Pin alittle more forward then on the stock springs, i'm sure they did this for better spring control & less wrap-up, If the tires clear, you should be good to go

Mike, make sure you check pinion angle, see where the trans tail shaft is at, then adjust from there, shoot for a bare minimum of -4, also make sure the rear hangers are in the 10:00 & 4:00 a clock position, top 10:00, bottom 4:00.