Quote:

Quote:



I haven't any issues with them at 500lbs open pressure without any bushings or honing.

Use/create Comp's recommended .030" side clearance, use a liquid assembly lube or oil (not thick paste), and whatever
you do...don't overtorque the shafts.






Sounds like I have it right except that I used Lubriplate assembly lube on the shafts? Is that a problem?
Thanks,
Mark




Lubriplate should be thin enough to wash away fairly quick. As usual prime with the valve covers off, watch everything....whenever possible you want oil flowing through there as opposed to great globs of greasey gunk clogging everything up (exaggerating a bit there).





Thanks Zippy!

Mark



1996 Ram 1500 Sport
1968 road runner
1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019