I haven't any issues with them at 500lbs open pressure without any bushings or honing.

Use/create Comp's recommended .030" side clearance, use a liquid assembly lube or oil (not thick paste), and whatever
you do...don't overtorque the shafts.





Sounds like I have it right except that I used Lubriplate assembly lube on the shafts? Is that a problem?
Thanks,
Mark


1996 Ram 1500 Sport
1968 road runner
1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019