Quote:

Did you rebuild the door hinges?
I left mine up about a 1/32 to the rear to allow for weight of glass and hinge break in...

Hopefully it will be right...




I decided to hang the doors and do a little more work on the body line. I ended up buying a Bosch laser type device for projecting a straight line. I am going to use the laser light to lay out a straight line with tape and then put a thin layer of bondo to the tape line, sand, remove tape and tape other side and redo the process. Back when I started work on this project fenders were not available so I converted my beat up '73 style fenders to '70 style fenders (I am cloning this into an AAR). I think this extra step will make it look much better.

While hanging the doors I discovered I definately need to rebuild the door hinges which I'll do after I finish working on the body lines.

Last edited by 73cudaproject; 05/25/10 05:24 PM.