SPRING PRESSURE ON MOPAR .590 CAM

Print Thread

Re: SPRING PRESSURE ON MOPAR .590 CAM [Re: 440Jim] #663854 04/11/10 01:40 PM 04/11/10 01:40 PM
Joined: May 2004 Posts: 3,210 robin hood country deaks OP master
deaks OP master Joined: May 2004 Posts: 3,210 robin hood country	Thanks Jim I still have to buy pushrods, new slicks and a converter yet, so money is getting a little tight. I will try it with the 6500 chip first, shift at 6200. If work picks up a little more, then i'll buy the springs sooner. Mick

Entire Thread
Subject	Posted By	Posted
SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/07/10 10:37 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	maximum entropy	04/07/10 10:56 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/08/10 01:25 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	ProSport	04/08/10 01:27 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Dunnuck Racing	04/08/10 01:43 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/08/10 09:30 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/09/10 12:40 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	493_DART	04/09/10 01:03 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Von	04/09/10 02:29 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/09/10 03:18 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/09/10 06:49 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Cab_Burge	04/09/10 07:10 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/09/10 07:51 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Cab_Burge	04/09/10 07:54 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/09/10 08:58 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	572B1	04/10/10 11:59 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/10/10 01:17 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/10/10 07:12 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/11/10 04:47 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/11/10 05:40 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Sport440	04/11/10 07:23 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	cbarracuda	04/11/10 05:48 PM

Hop To