SPRING PRESSURE ON MOPAR .590 CAM

Print Thread

Re: SPRING PRESSURE ON MOPAR .590 CAM [Re: 440Jim] #663852 04/10/10 03:12 PM 04/10/10 03:12 PM
Joined: May 2004 Posts: 3,210 robin hood country deaks OP master
deaks OP master Joined: May 2004 Posts: 3,210 robin hood country	I have nothing to measure them pressure wise but the eddy site claims they are good up to .600 lift, so rather than wipe the cam i'll try them and if they dont work out, i'll get my wallet out again. Mick

Entire Thread
Subject	Posted By	Posted
SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/07/10 10:37 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	maximum entropy	04/07/10 10:56 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/08/10 01:25 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	ProSport	04/08/10 01:27 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Dunnuck Racing	04/08/10 01:43 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/08/10 09:30 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/09/10 12:40 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	493_DART	04/09/10 01:03 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Von	04/09/10 02:29 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/09/10 03:18 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/09/10 06:49 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Cab_Burge	04/09/10 07:10 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/09/10 07:51 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Cab_Burge	04/09/10 07:54 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/09/10 08:58 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	572B1	04/10/10 11:59 AM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/10/10 01:17 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/10/10 07:12 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	440Jim	04/11/10 04:47 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	deaks	04/11/10 05:40 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	Sport440	04/11/10 07:23 PM
Re: SPRING PRESSURE ON MOPAR .590 CAM	cbarracuda	04/11/10 05:48 PM

Hop To