Quote:
Flow results from today on the RHS 2.02 head...
{snip}
Chambers measures at 62.5
Pretty good bang for the buck, I'd say. The as supplied valve job was VERY conservative, leaving quite a bit of margin at the valve edge. We're going to spend about 8 more hours this week and rub on the guide areas some more and correct the VJ and we'll find more flow, I'm sure. 
the supplied VJ better be very conservative for a 2.02 valve, since all the literature I've seen for them is that they use a stock magnum 1.92" valve diameter OOTB.
1976 Spinnaker White Plymouth Duster, /6 A833OD
1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!***
2011 Toxic Orange Dodge Charger R/T
2017 Grand Cherokee Overland
2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)
| 
