|
Re: Thermo - BOG!!!
#60569
05/28/08 12:03 AM
05/28/08 12:03 AM
|
Joined: Jan 2003
Posts: 5,275 near Harrisburg, Pa
440trk
master
|
master
Joined: Jan 2003
Posts: 5,275
near Harrisburg, Pa
|
Quote:
...I've been thinking vacuum leak, but can't find one with the rubber hose :stethoscope trick.
Any chance you've got cracked/damaged vacuum line or intake leak? Have you put a vacuum gauge on it to see what the manifold vacuum is doing?
Quote:
Can't change the idle spraying carb cleaner around the carb base. I've tried resetting the idle bleeds everywhere from 1.5 to 3.0 turns off their seats, and all I get is a "hunting" idle, that gradually gets worse as the engine warms up. Then eventually it stalls.
Does adjusting the air/fuel screws change the idle at all?
Quote:
I did a search of the site, and found some folks who are actually running ThermoQuads, so I'm hoping that by way of a "welcome to the club" one of those folks might have a tip or two for me.
Welcome to the TQ club!
If you give the metering rod tree screw a 1/2 turn clockwise, does your idle improve?
|
|
|
|
|
|