I measured those seats and they are about 21"x21" on the seating area. Just measure inside door to door and you will know how much room you have to work with. Thats what i did and then went junkyard hunting. I also liked these seats because i can remove the headrest and not block the back glass.I found some consoles that were really narrow( 6" or 7") this one is 10", real nice fit. Thats one of my old toys in the background, 2100 stroker with dual 48mm Delorto carbs with a 6 rib bus trans.We used to do a lot of woods trail and hill climbing. Randy