Conversion:318/904 to 340/727 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Conversion:318/904 to 340/727

Print Thread

Re: Conversion:318/904 to 340/727 [Re: cudagerry] #572368 01/04/10 04:03 PM 01/04/10 04:03 PM
Joined: Jan 2003 Posts: 2,111 Bowie, MD R Reggie top fuel
Reggie top fuel R Joined: Jan 2003 Posts: 2,111 Bowie, MD	Driver's side block mounting lugs are a bit closer together on a 340 but they can be adapted to the 318 bracket with either a spacer or washers.

Entire Thread
Subject	Posted By	Posted
Conversion:318/904 to 340/727	cudagerry	01/04/10 06:48 PM
Re: Conversion:318/904 to 340/727	540challenger	01/04/10 07:57 PM
Re: Conversion:318/904 to 340/727	Reggie	01/04/10 08:03 PM
Re: Conversion:318/904 to 340/727	DragDart360	01/04/10 10:41 PM
Re: Conversion:318/904 to 340/727	cudagerry	01/05/10 01:17 AM
Re: Conversion:318/904 to 340/727	scratchnfotraction	01/05/10 02:52 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1