pistons and cam to a 360 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer pistons and cam to a 360

Print Thread

Re: pistons and cam to a 360 [Re: 451Mopar] #541045 01/13/10 05:31 PM 01/13/10 05:31 PM
Joined: May 2005 Posts: 41 Denmark, Aeroe M Moparbil OP member
Moparbil OP member M Joined: May 2005 Posts: 41 Denmark, Aeroe	I have done some research on parts for the descriebed rebuild. The bore will be 0,020. Speed pro H116CP pistons is not possible to get in this size as a set. Bought each they get too expensive. also not possible to get any piston weight data. So I will go for KB107 Regarding Cam the choice is Lunati. But I am in doubt if it shall be 60403 or 60404 Will the HP / TQ data kindly given by 451Mopar alter much if 60403 was choosen? I want HP and TQ but is little sensitive about how the idle will be. Seeking the best compromise. Any driven experience with these cams welcome.

Entire Thread
Subject	Posted By	Posted
pistons and cam to a 360	Moparbil	11/30/09 05:54 PM
Re: pistons and cam to a 360	patrick	11/30/09 06:14 PM
Re: pistons and cam to a 360	MoparforLife	11/30/09 06:16 PM
Re: pistons and cam to a 360	RapidRobert	11/30/09 08:43 PM
Re: pistons and cam to a 360	Moparbil	12/01/09 09:03 PM
Re: pistons and cam to a 360	joedust451	12/02/09 02:05 AM
Re: pistons and cam to a 360	Anonymous	12/02/09 02:38 AM
Re: pistons and cam to a 360	Moparbil	12/02/09 03:52 PM
Re: pistons and cam to a 360	Moparbil	12/03/09 08:50 PM
Re: pistons and cam to a 360	451Mopar	12/04/09 05:34 AM
Re: pistons and cam to a 360	Moparbil	12/04/09 08:52 AM
Re: pistons and cam to a 360	shaker340	12/04/09 01:59 PM
Re: pistons and cam to a 360	patrick	12/04/09 03:52 PM
Re: pistons and cam to a 360	451Mopar	12/05/09 05:24 AM
Re: pistons and cam to a 360	451Mopar	12/05/09 07:06 AM
Re: pistons and cam to a 360	Moparbil	12/05/09 08:49 AM
Re: pistons and cam to a 360	451Mopar	12/06/09 02:33 AM
Re: pistons and cam to a 360	Moparbil	12/07/09 09:17 PM
Re: pistons and cam to a 360	451Mopar	12/08/09 06:55 AM
Re: pistons and cam to a 360	Moparbil	12/08/09 11:35 PM
Re: pistons and cam to a 360	Intense RT Dan	12/09/09 03:32 AM
Re: pistons and cam to a 360	dodgeboy11	12/09/09 04:22 AM
Re: pistons and cam to a 360	StandOnIt	12/09/09 12:12 PM
Re: pistons and cam to a 360	racincuda	12/09/09 01:47 PM
Re: pistons and cam to a 360	Moparbil	01/13/10 09:31 PM
Re: pistons and cam to a 360	451Mopar	01/14/10 07:41 AM
Re: pistons and cam to a 360	Flo	01/14/10 10:43 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1