Well finaly got a chance to work on the Barracuda a bit. Its been a few months. Not that I have been goofing off. Been hard at work on other things & the Barracuda kinda got in the back of the line. So I decided I would attack some of the rust areas. This spot is on the lower left (drivers) quarter just in front of the wheel. It has rust through. I sanded it down with a paint stripper wheel to the bare metal so I could see where I needed to cut out. Also after removing the paint the body has quite a lot of dimples in the area just above the rust through. Looks like someone tap a hammer all around.