While the old broken rear glass was out. I cleaned up the channel down to bare metal. I primed it with rattle can epoxy primer. I also decided on the color I wanted to aint the car. Its a late model Chrysler color. Called Flame Red or Poppy Red. Very popular on Rams, PT's, Mini Vans. I got that color from a Dart that was in Mopar Muscele. It was a similar color with black carpet & black & white interior. Looked good in the mag so I went with it. So I began trimming it out with Dupli Color rattle can as well. Also removed the metal bolt in floor section under the glass to paint it. Every thing looked good underneath so since it will be covered I left it the factory green.