Quote:
you get
8.2 DCR, using the KB method nets 8.8....it should run fine on 92 or 93, you may have to be a little conservative with your distributor's timing curve.
Does this number take into account his altitude? If not, he's going to end up with a DCR of about 6.5 and a SCR in the high 7s.
And, I don't like the cam... the ramps are too slow for a roller. Get something in the 35º range using the .050" numbers.
ETA: I did some rough calcs using 60º as the ICA, a 10.5 SCR and 6000' of altitude. Your cranking pressure is only 140 psi. That's not going to get it done, Frank.
Last edited by 64Post; 10/21/09 01:10 PM.
