Quote:

Yes you are now parallel. So put that 4* 2x4 shim in there, for a nose down pinion angle.

In your example both camps methods, would work out exactly to the same pinion angle.

It isnt always like that though, witch is why I aways use the Tranny/Pinion centerline method.

The more accurate camp method!! mike




It has the 4* shim in it now. the thick part of the shim is 3/8"
I also noticed I was getting the same numbers both ways. I think I will put a 6* shim in it. they are 5/8" and that should give me enough to make me happy. I have plenty of bolt head poking up now. not a problem.

5543651-shimnpin.JPG (133 downloads)
Last edited by Joshs68; 10/13/09 09:48 PM.