I have a question on a common subject.
I have checked my pinion angle and I think I am at zero degrees.I am checking the driveshaft and the yoke while the car is on the ground. I get a negetive 2* or just in between 2* and 3* on the gauge. I get the same reading on the driveshaft and the yoke, they both read about 2.5* and it is both on the same side of zero. . they do look very much to be in line together. am I correct in that would be a zero? I have a 4* shim in the car now. I have super stock springs and they are in the upper mount holes.
how much more shim do I need?
I think I can get an 8* shim, or would a six* shim work. I am not sure of the geometry of the shims in relation to how much it moves the yoke.
I want to remove the 4* and only use one shim.
I hope I have explained myself well enough and thanks for the help