|
Re: timing for a mild 360
[Re: 71valiant]
#492594
10/09/09 08:00 PM
10/09/09 08:00 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Quote:
Quote:
Quote:
360 stock pistons headers airgap- carter 625 afb I was running it at 35 but it was hard to start after it got hot. I set it back down to 30 and it starts alot better hot.
Where do yall run your timing?
so like 7.5-8.0:1 cr in that 360? run as much initial as you can and limit the amount of mech. advance. mabey try 15-17deg initial and 20deg mech. should get you where you need to be. that hot start prob could be many things not related to timing.
Forgot to add it has a 480/480 lift 292/292 duration [Email]230@.050[/Email] cam. I put a mopar thin head gasket. I must have atleast 8:1 CR
that cam will bleed off ALOT of dynamic cr. good luck with that. TIMING is NOT gonna fix it.
|
|
|
|
|
|