engine guys, #3 bearing cap won't seat ? **update**

Print Thread

Re: engine guys, #3 bearing cap won't seat properly? [Re: dvw] #461811 09/07/09 01:55 PM 09/07/09 01:55 PM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Quote: Could the holes in the cap be so tight that the studs are causing the cap to lean over? I would try a stock set of bolts. If the stud to hole clearance was close and the hole bores were not machined square it could force the cap out of position. Doug I agree, with studs sometimes you need to clearance the bolt holes to get the caps to seat properly & with #3 being the thrust bearing it's more critical...

Entire Thread
Subject	Posted By	Posted
engine guys, #3 bearing cap won't seat ? update	gregsdart	09/07/09 05:36 PM
Re: engine guys, #3 bearing cap won't seat properly?	dvw	09/07/09 05:51 PM
Re: engine guys, #3 bearing cap won't seat properly?	1_WILD_RT	09/07/09 05:55 PM
Re: engine guys, #3 bearing cap won't seat properly?	RonP	09/07/09 05:58 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/07/09 06:03 PM
Re: engine guys, #3 bearing cap won't seat properly?	RonP	09/07/09 06:12 PM
Re: engine guys, #3 bearing cap won't seat properly?	1_WILD_RT	09/07/09 06:16 PM
Re: engine guys, #3 bearing cap won't seat properly?	ccdave	09/08/09 02:25 AM
Re: engine guys, #3 bearing cap won't seat properly?	CompWedgeEngines	09/07/09 06:27 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/07/09 07:29 PM
Re: engine guys, #3 bearing cap won't seat properly?	Cab_Burge	09/07/09 08:00 PM
Re: engine guys, #3 bearing cap won't seat properly?	emarine01	09/07/09 08:14 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/07/09 08:20 PM
Re: engine guys, #3 bearing cap won't seat properly?	Ron Silva	09/07/09 08:38 PM
Re: engine guys, #3 bearing cap won't seat properly?	Hemiroid	09/07/09 08:42 PM
Re: engine guys, #3 bearing cap won't seat properly?	B G Racing	09/07/09 08:56 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/07/09 09:17 PM
Re: engine guys, #3 bearing cap won't seat properly?	jamesc	09/07/09 11:51 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 12:26 AM
Re: engine guys, #3 bearing cap won't seat properly?	Ron Silva	09/08/09 01:00 AM
Re: engine guys, #3 bearing cap won't seat properly?	jamesc	09/08/09 01:41 AM
Re: engine guys, #3 bearing cap won't seat properly?	dvw	09/08/09 01:47 AM
Re: engine guys, #3 bearing cap won't seat properly?	JohnRR	09/08/09 02:08 AM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 04:18 AM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 04:34 AM
Re: engine guys, #3 bearing cap won't seat properly?	Monte_Smith	09/08/09 05:07 AM
Re: engine guys, #3 bearing cap won't seat properly?	JohnRR	09/08/09 05:09 AM
Re: engine guys, #3 bearing cap won't seat properly?	Al_Alguire	09/08/09 05:14 AM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 12:47 PM
Re: engine guys, #3 bearing cap won't seat properly?	The Shadow	09/08/09 12:55 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 01:01 PM
Re: engine guys, #3 bearing cap won't seat properly?	The Shadow	09/08/09 01:21 PM
Re: engine guys, #3 bearing cap won't seat properly?	gregsdart	09/08/09 02:55 PM
Re: engine guys, #3 bearing cap won't seat properly?	Cab_Burge	09/08/09 04:19 PM
Re: engine guys, #3 bearing cap won't seat properly?	JohnRR	09/08/09 08:53 PM
Re: engine guys, #3 bearing cap won't seat properly?	602heavy	09/08/09 09:03 PM
Re: engine guys, #3 bearing cap update	gregsdart	09/08/09 09:33 PM
Re: engine guys, #3 bearing cap update	gregsdart	09/15/09 01:09 PM
Re: engine guys, #3 bearing cap won't seat properly?	S/ST 3040	09/09/09 12:57 AM
Re: engine guys, #3 bearing cap won't seat properly?	Moparnut426	09/08/09 12:16 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To